How To Put The Motorcycle Chain Back

If the motorcycle chain is dropped, you can hang it up and turn it on again.

1. The motorcycle chain cannot be dismantled casually. The motorcycle chain has a loose buckle. The chain can be removed by pinching the loose buckle with a clamp. If the transmission chain of the motorcycle is too loose or too tight, there will be a sound. The method of judging is that when parking, the up and down movement of the chain is 30-35 mm, and the all-inclusive chain box is generally controlled within 25 mm.

2. The screw of the motorcycle was broken when the small chain of the engine was replaced. Remove which part is broken first. If there is a leak at the broken position of the screw, then use electric welding to weld an iron rod, then rotate it, and if it breaks inside, then you can only use an electric drill. How big a drill bit should be used for the screws, and then re-weld after drilling.

3. The three-piece set of front and rear cranksets for motorcycle replacement chain. For the front sprocket of the motorcycle, first remove the sprocket cover, tighten the rear brake, then remove the sprocket screw, remove the front sprocket, then remove the live joint on the bar, remove the chain, the rear sprocket needs to be removed first. Remove the rear wheel, then remove the sprocket and the sprocket seat together, remove the fixing screw of the sprocket, and then the sprocket can be removed.